Hydro Blower

Neither the water hose or the pressure washer is ideal for job cleanup when the goal is to loosen and remove dirt and debris that is created from the Current job site or any project that has just been completed. We call this type of dirt “new dirt”. the water hose can move it but struggles to loosen it and the pressure washer “in the wrong hands” Is more likely to loosen “new dirt” and “old dirt” causing more problems than it solves, And limited two an average of three GHP, it struggles to move the loose debris from the surface.

You could assist the hose with a stiff broom to improve its performance and you could assist the pressure washer by utilizing a water hose at the same time.

Both options involved two people doubling cost and wasting money.

Introducing The Hydro Blower

The hydro blower attachment combines the driving force air of your gas-powered backpack blower with the GPM of a water hose creating the perfect tool to loosen “new dirt” while rapidly removing the debris without damaging the surface being cleaned. Making the hydro blower the most effective tool for the job. This easy to use and extremely affordable product Is the greatest most efficient site cleanup tool you'll ever own and requires only one person to operate,

Hydro Blower Value And Diversity

The hydro blower attachment Is not just limited to site cleanup, it turns out it's great for countless applications like: Fire control, Rrooftop cleaning, Spider web removal, Excellent at keeping toxic debris from entering the atmosphere during cleanup. It is very efficient when watering new landscaping. Or when used to pre-soak construction materials with water. Very handy at controlling road dust in small areas.

Just to mention a few…

• The hydro blower product:

The hydro blower easily attaches to the discharge tube of any gas-powered backpack blower, combing the driving force of your gas-powered backpack blower with the GPM of a water hose to create an excellent cleanup tool with unlimited applications.

The hydro blower attachment is produced using the highest quality and affordable components, each chosen for their durability and design and assembled with stainless steel crimp rings for a reliable, maintenance free product.

Hydro Blower Installation Guide

• Hydro blower attachment installation:

To accommodate the full range of different style backpack blowers the hydro blower attachment tubing has come disassembled from the valve so that the proper length may be cut for proper positioning on the blower’s discharge tube. (Please refer to the diagram showing proper placement.)

1st: Using the steel band on the valve body, loosely mount the valve on the air in end of the last blower discharge tube. Making sure its position on the tube does not interfere with the operation of the discharge tube.

2nd Once the position is confirmed, position the 2 barbed 90s attached to the valves tubing, On the air out end making sure they are located directly across from one another, (roughly 2 to 3 inches from the end on most tubes).

3rd Cut the tubing to the proper length to connect to the valve and insert the tubing into the control valve fittings until the tubing enters completely into the tightening collar. Once complete turn the tightening collar until it is tightly securing the tube.

4th Once the valve tubing is installed and final position has been determined Mark the exterior of the tube indicating where the holes need to be for the barbed 90s, Carefully drill two half inch holes, one on either side of the tube, making sure they are located directly across from one another, (and roughly 2 to 3 inches from the end on most tubes).

5th Firmly insert the 2 barbed fittings that are attached to the tubing into the half inch holes (As shown in diagram)

6th Firmly tighten the steel band securing the valve to the discharge tube.

Last

Carefully and firmly attach water hose to the valve and comfortably drape hose over your shoulder while using the blower.